PSB派士博蓄电池MFM-12-24规格及参数

PSB派士博蓄电池MFM-12-24规格及参数

电解液固定在胶质中，不会发生泄漏。
固体凝胶电解质，无内部短路，热容量大，热消耗能力强，无一般电池(吸附式)易产生的热失控现象。
欧洲AMER-SIL公司PVC-SiO2专用胶体电池隔板，孔率高，电阻低，电池循环性能好；
极低的电解液浓度，对极板腐蚀弱，电池寿命长；
正负板栅采用铅钙多元合金，电池自放电极低，两年内不需补充电； 
电池抗深放电能力强，100％放电后仍可继续接在负载上，在四星期内充电可恢复原容量；
采用高灵敏低压安全阀，使蓄电池使用更加安全可靠；
采用多层耐酸O形橡胶圈高压密封，保证了使用寿命后期极柱生长时的密封性能。

Thespeciality of the products
Designservice life: 12+ years (20oC).

High-quality colloid is confected from silicon dioxide, soelectrolyte's distribute is symmetrical and no 

phenomena of delamination of electrolyte.

The electrolytic liquid is fixed in the glue,and will notreveal.

Solid gel electrolyte,there is not inside that short out,the hotcapacity is large,heat exhaustion ability

is strong,there is no phenomenon out of control of heat apt toproduce of general battery(absorbing

 type).Solid gel eletrolyte even in density,stored in the sourstrata phenomenon.

Our clapboards are colloid battery clapboards which Europe AMER-SILcompany PVC-SiO2 specially used, 

its aperture rate is high, and its resistance is low, circularcapability of battery is perfect. 

Concentration of electrolyte is very low, so it has faint erosiveeffectsl on plates, life of battery is long then.

Plates adopt to lead-calcium multiple alloy, local action ofbattery is very low, so it is needless to charge

 within two years.

Anti-deep-discharging capacity of battery is strong, it can stillbe continually connect with load even though

 after 100％ discharge., and it could resume originalcapacity if charging within four weeks.

Safety valve of high-delicacy and low-press is adopted, and itmakes battery using on the safe side.

Using multi-acid O-ring rubber seal of high pressure to ensure thatthe life of the latter part of a column of 

the sealing performance. 

二、技术规格：